dmesg - Rockchip ARMv8 Cortex-A76
Booting Linux on physical CPU 0x0000000000 [0x412fd050]
Linux version 5.10.110 (builty@fydebeast) (Chromium OS 14.0_pre450784_p20220316-r5 clang version 14.0.0 (/var/tmp/portage/sys-devel/llvm-14.0_pre450784_p20220316-r5/work/llvm-14.0_pre450784_p20220316/clang 282c83c32384cb2f37030c28650fef4150a8b67c), LLD 14.0.0) #4 SMP PREEMPT Fri Oct 28 16:35:22 CST 2022
Machine model: Rockchip RK3588S TABLET 12C Board
earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
printk: bootconsole [uart8250] enabled
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
Reserved memory: created CMA memory pool at 0x00000001ff800000, size 8 MiB
OF: reserved mem: initialized node cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000200000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x00000001ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000200000-0x00000000083fffff]
node 0: [mem 0x0000000009400000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
On node 0 totalpages: 2027008
DMA zone: 15288 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 978432 pages, LIFO batch:63
Normal zone: 16384 pages used for memmap
Normal zone: 1048576 pages, LIFO batch:63
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.2
percpu: Embedded 32 pages/cpu s92904 r8192 d29976 u131072
pcpu-alloc: s92904 r8192 d29976 u131072 alloc=32*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on. Total pages: 1995336
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
Memory: 7850548K/8108032K available (14846K kernel code, 2680K rwdata, 6464K rodata, 1600K init, 591K bss, 249292K reserved, 8192K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x38/0x2b8 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 52371 entries in 205 pages
ftrace: allocated 205 pages with 5 groups
rcu: Preemptible hierarchical RCU implementation.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 480 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
ITS [mem 0xfe640000-0xfe65ffff]
ITS@0x00000000fe640000: allocated 8192 Devices @1001b0000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001c0000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
ITS [mem 0xfe660000-0xfe67ffff]
ITS@0x00000000fe660000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000100200000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000100210000
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
LoadPin: ready to pin (currently not enforcing)
Chromium OS LSM: enabled
SELinux: Initializing.
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
rcu: Hierarchical SRCU implementation.
Platform MSI: msi-controller@fe640000 domain created
Platform MSI: msi-controller@fe660000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
GICv3: CPU1: using allocated LPI pending table @0x0000000100220000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
GICv3: CPU2: using allocated LPI pending table @0x0000000100230000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
GICv3: CPU3: using allocated LPI pending table @0x0000000100240000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
GICv3: CPU4: using allocated LPI pending table @0x0000000100250000
CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
GICv3: CPU5: using allocated LPI pending table @0x0000000100260000
CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
GICv3: CPU6: using allocated LPI pending table @0x0000000100270000
CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
GICv3: CPU7: using allocated LPI pending table @0x0000000100280000
CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: LSE atomic instructions
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU features: detected: RCpc load-acquire (LDAPR)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters, enabled
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.086:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
thermal thermal_zone1: power_allocator: sustainable_power will be estimated
thermal thermal_zone2: power_allocator: sustainable_power will be estimated
thermal thermal_zone3: power_allocator: sustainable_power will be estimated
thermal thermal_zone4: power_allocator: sustainable_power will be estimated
thermal thermal_zone5: power_allocator: sustainable_power will be estimated
thermal thermal_zone6: power_allocator: sustainable_power will be estimated
cpuidle: using governor menu
Registered FIQ tty driver
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
ramoops: dmesg-0 0x20000@0x0000000000110000
ramoops: console 0x80000@0x0000000000130000
ramoops: pmsg 0x50000@0x00000000001b0000
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0xf0000@0x110000, ecc: 0
rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
rockchip-pinctrl pinctrl: probed pinctrl
cryptd: max_cpu_qlen set to 1000
fiq_debugger fiq_debugger.0: IRQ fiq not found
fiq_debugger fiq_debugger.0: IRQ wakeup not found
fiq_debugger_probe: could not install nmi irq handler
printk: console [ttyFIQ0] enabled
printk: bootconsole [uart8250] disabled
Registered fiq debugger ttyFIQ0
vbus_typec: 5000 mV, enabled
reg-fixed-voltage vbus-typec: vbus_typec supplying 5000000uV
reg-fixed-voltage vcc-in: Looking up vin-supply from device tree
vcc_in: supplied by vbus_typec
vbus_typec: could not add device link regulator.2: -ENOENT
vcc_in: 12000 mV, enabled
reg-fixed-voltage vcc-in: vcc_in supplying 12000000uV
reg-fixed-voltage vcc-sysin: Looking up vin-supply from device tree
vcc_sysin: supplied by vcc_in
vcc_in: could not add device link regulator.3: -ENOENT
vcc_sysin: 4000 mV, enabled
reg-fixed-voltage vcc-sysin: vcc_sysin supplying 4000000uV
reg-fixed-voltage vcc-lcdbl-in: Looking up vin-supply from device tree
vcc_lcdbl_in: supplied by vcc_in
vcc_in: could not add device link regulator.4: -ENOENT
vcc_lcdbl_in: 12000 mV, enabled
reg-fixed-voltage vcc-lcdbl-in: vcc_lcdbl_in supplying 12000000uV
reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
vcc_1v1_nldo_s3: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.5: -ENOENT
vcc_1v1_nldo_s3: 1100 mV, enabled
reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
reg-fixed-voltage batt-in: Looking up vin-supply from device tree
batt_in: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.6: -ENOENT
batt_in: 1100 mV, enabled
reg-fixed-voltage batt-in: batt_in supplying 1100000uV
vcc_lcd_en: no parameters, enabled
reg-fixed-voltage vcc-lcd-en: vcc_lcd_en supplying 0uV
iommu: Default domain type: Translated
rk_iommu fdab9000.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdb50800.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdb60f00.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdb70f00.iommu: version = 2
rk_iommu fdb90480.iommu: version = 2
rk_iommu fdba0800.iommu: version = 2
rk_iommu fdba4800.iommu: version = 2
rk_iommu fdba8800.iommu: version = 2
rk_iommu fdbac800.iommu: version = 2
rk_iommu fdbb0800.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdbdf000.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdbef000.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdc38700.iommu: version = 2
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
rk_iommu fdc48700.iommu: version = 2
rk_iommu fdd97e00.iommu: version = 2
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
Advanced Linux Sound Architecture Driver Initialized.
rockchip-cpuinfo cpuinfo: SoC : 35880000
rockchip-cpuinfo cpuinfo: Serial : 4d4ec08249e800ef
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=21 bucket_order=0
Registering esdfs 0.2
alt_syscall: table 'read_write_test' available.
alt_syscall: table 'android' available.
alt_syscall: table 'android_permissive' available.
alt_syscall: table 'third_party' available.
alt_syscall: table 'third_party_permissive' available.
alt_syscall: table 'complete' available.
alt_syscall: table 'complete_permissive' available.
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
phy phy-fd5d0000.syscon:[email protected]: Looking up phy-supply from device tree
phy phy-fd5d0000.syscon:[email protected]: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d0000.syscon:[email protected]: Looking up vbus-supply from device tree
phy phy-fd5d0000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d8000.syscon:[email protected]: Looking up phy-supply from device tree
phy phy-fd5d8000.syscon:[email protected]: Looking up phy-supply property in node /syscon@fd5d8000/usb2-phy@8000/host-port failed
phy phy-fd5dc000.syscon:[email protected]: Looking up phy-supply from device tree
phy phy-fd5dc000.syscon:[email protected]: Looking up phy-supply property in node /syscon@fd5dc000/usb2-phy@c000/host-port failed
phy phy-fee00000.phy.3: Looking up phy-supply from device tree
phy phy-fee00000.phy.3: Looking up phy-supply property in node /phy@fee00000 failed
phy phy-fee20000.phy.4: Looking up phy-supply from device tree
phy phy-fee20000.phy.4: Looking up phy-supply property in node /phy@fee20000 failed
phy phy-feda0000.phy.5: Looking up phy-supply from device tree
phy phy-feda0000.phy.5: Looking up phy-supply property in node /phy@feda0000 failed
phy phy-fed80000.phy.6: Looking up phy-supply from device tree
phy phy-fed80000.phy.6: Looking up phy-supply property in node /phy@fed80000/dp-port failed
phy phy-fed80000.phy.7: Looking up phy-supply from device tree
phy phy-fed80000.phy.7: Looking up phy-supply property in node /phy@fed80000/u3-port failed
rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
rk-pcie fe190000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe190000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe190000 failed
rk-pcie fe190000.pcie: no vpcie3v3 regulator found
pwm-backlight backlight: Looking up power-supply from device tree
pwm-backlight backlight: Looking up power-supply property in node /backlight failed
pwm-backlight backlight: supply power not found, using dummy regulator
mpp_service mpp-srv: unknown mpp version for missing VCS info
mpp_service mpp-srv: probe start
rk-pcie fe190000.pcie: missing legacy IRQ resource
rk-pcie fe190000.pcie: IRQ msi not found
rk-pcie fe190000.pcie: use outband MSI support
rk-pcie fe190000.pcie: Missing *config* reg space
rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000
rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
rk-pcie fe190000.pcie: Missing *config* reg space
rk-pcie fe190000.pcie: invalid resource
mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
mpp_vdpu2 fdb50400.vdpu: probe device
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: probing finish
mpp_vepu2 jpege-ccu: probing start
mpp_vepu2 jpege-ccu: probing finish
mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
mpp_vepu2 fdb50000.vepu: probing start
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: probing finish
mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
mpp_vepu2 fdba0000.jpege-core: probing start
mpp_vepu2 fdba0000.jpege-core: attach ccu success
mpp_vepu2 fdba0000.jpege-core: probing finish
mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
mpp_vepu2 fdba4000.jpege-core: probing start
mpp_vepu2 fdba4000.jpege-core: attach ccu success
mpp_vepu2 fdba4000.jpege-core: probing finish
mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
mpp_vepu2 fdba8000.jpege-core: probing start
mpp_vepu2 fdba8000.jpege-core: attach ccu success
mpp_vepu2 fdba8000.jpege-core: probing finish
mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
mpp_vepu2 fdbac000.jpege-core: probing start
mpp_vepu2 fdbac000.jpege-core: attach ccu success
mpp_vepu2 fdbac000.jpege-core: probing finish
mpp-iep2 fdbb0000.iep: Adding to iommu group 9
mpp-iep2 fdbb0000.iep: probe device
mpp-iep2 fdbb0000.iep: allocate roi buffer failed
mpp-iep2 fdbb0000.iep: probing finish
mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
mpp_jpgdec fdb90000.jpegd: probe device
mpp_jpgdec fdb90000.jpegd: probing finish
mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1006: No niu aclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1009: No niu hclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc38000 failed
mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1006: No niu aclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1009: No niu hclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc48000 failed
mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
mpp_rkvenc2 rkvenc-ccu: probing start
mpp_rkvenc2 rkvenc-ccu: probing finish
mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
mpp_av1dec: Adding child /av1d@fdc70000
mpp_av1dec: register device av1d-master
mpp_av1dec av1d-master: av1_iommu_of_xlate,784
av1_iommu_probe_device,737, consumer : av1d-master, supplier : fdca0000.iommu
mpp_av1dec av1d-master: Adding to iommu group 15
mpp_av1dec av1d-master: probing start
mpp_av1dec av1d-master: probing finish
mpp_service mpp-srv: probe success
dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
rockchip-pvtm fda40000.pvtm: pvtm@0 probed
rockchip-pvtm fda50000.pvtm: pvtm@1 probed
rockchip-pvtm fda60000.pvtm: pvtm@2 probed
rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
rockchip-system-monitor rockchip-system-monitor: system monitor probe
arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active.
random: fast init done
random: crng init done
rockchip-vop2 fdd90000.vop: Adding to iommu group 14
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 6
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 7
rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart0-win0 as cursor plane for vp0
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart1-win0 as cursor plane for vp1
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart2-win0 as cursor plane for vp2
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart3-win0 as cursor plane for vp3
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
rockchip-drm display-subsystem: bound fdd90000.vop (ops vop2_component_ops)
dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
panel-simple-dsi-fyde fde20000.dsi.0: Looking up power-supply from device tree
loop: module loaded
lkdtm: No crash points registered, enable through debugfs
rockchip-spi feb20000.spi: no high_speed pinctrl state
rk806 spi2.0: chip id: RK806,ver:0x2, 0x0
rk806 spi2.0: ON: 0x80 OFF:0x80
rk806-regulator rk806-regulator.3.auto: Looking up vcc1-supply from device tree
vdd_gpu_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.8: -ENOENT
vdd_gpu_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc2-supply from device tree
vdd_cpu_lit_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.9: -ENOENT
vdd_cpu_lit_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc3-supply from device tree
vdd_log_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.10: -ENOENT
vdd_log_s0: 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc4-supply from device tree
vdd_vdenc_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.11: -ENOENT
vdd_vdenc_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc5-supply from device tree
vdd_ddr_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.12: -ENOENT
vdd_ddr_s0: 850 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc6-supply from device tree
vdd2_ddr_s3: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.13: -ENOENT
vdd2_ddr_s3: at 500 mV, enabled
vdd_2v0_pldo_s3: Bringing 2025000uV into 2000000-2000000uV
vdd_2v0_pldo_s3: ramp_delay not set
rk806-regulator rk806-regulator.3.auto: Looking up vcc7-supply from device tree
vdd_2v0_pldo_s3: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.14: -ENOENT
vdd_2v0_pldo_s3: 2000 mV, enabled
vcc_3v3_s3: Bringing 3325000uV into 3300000-3300000uV
vcc_3v3_s3: ramp_delay not set
rk806-regulator rk806-regulator.3.auto: Looking up vcc8-supply from device tree
vcc_3v3_s3: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.15: -ENOENT
vcc_3v3_s3: 3300 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc9-supply from device tree
vddq_ddr_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.16: -ENOENT
vddq_ddr_s0: at 500 mV, enabled
vcc_1v8_s3: Bringing 1825000uV into 1800000-1800000uV
vcc_1v8_s3: ramp_delay not set
rk806-regulator rk806-regulator.3.auto: Looking up vcc10-supply from device tree
vcc_1v8_s3: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.17: -ENOENT
vcc_1v8_s3: 1800 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.18: -ENOENT
vdd_0v75_s3: 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.19: -ENOENT
vdd_ddr_pll_s0: 850 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.20: -ENOENT
avdd_0v75_s0: 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.21: -ENOENT
vdd_0v85_s0: 850 mV, enabled
nldo5_s0: at 750 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
nldo5_s0: supplied by vcc_1v1_nldo_s3
rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.23: -ENOENT
avcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.24: -ENOENT
vcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.25: -ENOENT
avdd_1v2_s0: 1200 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
vcc_3v3_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.26: -ENOENT
vcc_3v3_s0: 3300 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
vccio_sd_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.27: -ENOENT
vccio_sd_s0: 1800 3300 mV at 3300 mV, enabled
rk806-regulator rk806-regulator.3.auto: Looking up vcca-supply from device tree
pldo6_s3: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.28: -ENOENT
pldo6_s3: 1800 mV, enabled
rk806 spi2.0: no sleep-setting state
rk806 spi2.0: no reset-setting pinctrl state
rk806 spi2.0: no dvs-setting pinctrl state
rockchip-spi feb30000.spi: no high_speed pinctrl state
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver r8152
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply property in node /power-management@fd8d8000/power-controller failed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform fc800000.usb: EHCI Host Controller
ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.110 ehci_hcd
usb usb1: SerialNumber: fc800000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform fc880000.usb: EHCI Host Controller
ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.110 ehci_hcd
usb usb2: SerialNumber: fc880000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform fc840000.usb: Generic Platform OHCI controller
ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 5.10.110 ohci_hcd
usb usb3: SerialNumber: fc840000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform fc8c0000.usb: Generic Platform OHCI controller
ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: Generic Platform OHCI controller
usb usb4: Manufacturer: Linux 5.10.110 ohci_hcd
usb usb4: SerialNumber: fc8c0000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver option
usbcore: registered new interface driver qcserial
input: fyde-vdtb as /devices/virtual/misc/vdtb/input0
misc vdtb: device is working.
input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input1
i2c /dev entries driver
rk860-regulator 0-0042: Looking up vin-supply from device tree
vdd_cpu_big0_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.29: -ENOENT
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
vdd_cpu_big0_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 0-0043: Looking up vin-supply from device tree
vdd_cpu_big1_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.30: -ENOENT
vdd_cpu_big1_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 2-0042: Looking up vin-supply from device tree
vdd_npu_s0: supplied by vcc_sysin
vcc_sysin: could not add device link regulator.31: -ENOENT
vdd_npu_s0: 550 950 mV at 800 mV, enabled
rtc-hym8563 6-0051: rtc information is valid
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
rtc-hym8563 6-0051: registered as rtc0
rtc-hym8563 6-0051: setting system clock to 2022-11-04T17:28:11 UTC (1667582891)
i2c 6-006b: Fixing up cyclic dependency with 6-004e
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
thermal thermal_zone7: power_allocator: sustainable_power will be estimated
sbs-battery 5-000b: sbs-battery: battery gas gauge device registered
bq25700-charger 6-006b: Battery found
bq25700-charger 6-006b: Battery capacity:100, ret:0
sbs-battery 5-000b: I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.
Fallback method does not support PEC.
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
bq25700-charger 6-006b: Invalid or missing extcon dev1
vbus5v0_typec: at 5000 mV, disabled
bq25700-charger 6-006b: automode supported, waiting for events
bq25700-charger 6-006b: bq25700 notify_psy is error
rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: [email protected]
device-mapper: verity-chromeos: dm-verity-chromeos registered
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: bin=0
cpu cpu0: leakage=17
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: pvtm=4
cpu cpu0: pvtm-volt-sel=0
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: Looking up mem-supply from device tree
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: bin=0
cpu cpu4: leakage=14
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: pvtm=1747
cpu cpu4: pvtm-volt-sel=6
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: Looking up mem-supply from device tree
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: bin=0
cpu cpu6: leakage=14
cpu cpu6: Looking up cpu-supply from device tree
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
cpu cpu6: pvtm=1736
cpu cpu6: pvtm-volt-sel=5
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: Looking up mem-supply from device tree
cpu cpu0: avs=0
cpu cpu4: avs=0
cpu cpu6: avs=0
cpu cpu0: EM: OPP:816000 is inefficient
cpu cpu0: EM: OPP:600000 is inefficient
cpu cpu0: EM: created perf domain
cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
cpu cpu4: EM: OPP:1200000 is inefficient
cpu cpu4: EM: OPP:816000 is inefficient
cpu cpu4: EM: OPP:600000 is inefficient
cpu cpu4: EM: created perf domain
cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
cpu cpu6: EM: OPP:816000 is inefficient
cpu cpu6: EM: OPP:600000 is inefficient
cpu cpu6: EM: created perf domain
cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
usb 1-1: new high-speed USB device number 2 using ehci-platform
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
optee: probing for conduit method.
optee: revision 3.13 (3f0f0b05)
optee: initialized driver
usb 2-1: new high-speed USB device number 2 using ehci-platform
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply property in node /power-management@fd8d8000/power-controller failed
input: HDMI/DP-rockchip-0 HDMI/DP-rockchip-0 as /devices/platform/dp0-sound/sound/card0/input2
input: headset-keys as /devices/platform/es8388-sound/input/input3
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card1/input4
GACT probability NOT on
xt_time: kernel timezone is -0000
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
[BT_RFKILL]: Enter rfkill_rk_init
[WLAN_RFKILL]: Enter rfkill_wlan_init
[WLAN_RFKILL]: Enter rfkill_wlan_probe
[WLAN_RFKILL]: can't find rockchip,grf property
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275p
[WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 23 flags = 0.
[WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 0, flags = 0.
[WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[WLAN_RFKILL]: Exit rfkill_wlan_probe
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 122.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 28.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 22.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 21.
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: bt_default device registered.
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 DA4064 58.2 GiB
mmcblk0boot0: mmc0:0001 DA4064 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DA4064 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DA4064 partition 3 16.0 MiB, chardev (236:0)
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: deflate
Key type encrypted registered
rga3_core0 fdb60000.rga: Adding to iommu group 2
rga: rga3_core0_irq, irq = 34, match scheduler
rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core0 probe successfully
rga3_core1 fdb70000.rga: Adding to iommu group 3
rga: rga3_core1_irq, irq = 35, match scheduler
rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core1 probe successfully
rga: rga2_irq, irq = 36, match scheduler
rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
rga: rga2 probe successfully
rga2_mmu: IOMMU binding successfully, default mapping core[0x1]
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
rga: Module initialized. v1.2.20
********************************************************************
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
** **
** This means that this kernel is built to expose clk operations **
** such as parent or rate setting, enabling, disabling, etc. **
** to userspace, which may compromise security on your system. **
** **
** If you see this message and you are not debugging the **
** kernel, report this immediately to your vendor! **
** **
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
********************************************************************
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
reg-fixed-voltage vcc-3v3-sd-s0: Looking up vin-supply from device tree
vcc_3v3_sd_s0: supplied by vcc_3v3_s3
vcc_3v3_s3: could not add device link regulator.33: -ENOENT
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
vcc_3v3_sd_s0: 3300 mV, enabled
mali fb000000.gpu: Kernel DDK version g13p0-01eac0
mali fb000000.gpu: Looking up mali-supply from device tree
reg-fixed-voltage vcc-3v3-sd-s0: vcc_3v3_sd_s0 supplying 3300000uV
reg-fixed-voltage combophy-avdd0v85: Looking up vin-supply from device tree
combophy_avdd0v85: supplied by vdd_0v85_s0
vdd_0v85_s0: could not add device link regulator.34: -ENOENT
combophy_avdd0v85: 850 mV, enabled
mali fb000000.gpu: Looking up mem-supply from device tree
reg-fixed-voltage combophy-avdd0v85: combophy_avdd0v85 supplying 850000uV
mali fb000000.gpu: Looking up mali-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
rockchip-dmc dmc: Looking up center-supply from device tree
mali fb000000.gpu: Looking up mem-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
rockchip-dmc dmc: Looking up mem-supply from device tree
rockchip-dmc dmc: Looking up center-supply from device tree
vdd_ddr_s0: could not add device link dmc: -EEXIST
vdd_ddr_s0: Failed to create debugfs directory
mali fb000000.gpu: Looking up mali-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
rockchip-dmc dmc: Looking up mem-supply from device tree
vdd_log_s0: could not add device link dmc: -EEXIST
vdd_log_s0: Failed to create debugfs directory
rockchip-dmc dmc: leakage=44
rockchip-dmc dmc: leakage-volt-sel=1
rockchip-dmc dmc: avs=0
rockchip-dmc dmc: current ATF version 0x100
mali fb000000.gpu: leakage=20
rockchip-dmc dmc: normal_rate = 1560000000
rockchip-dmc dmc: reboot_rate = 2112000000
rockchip-dmc dmc: suspend_rate = 528000000
rockchip-dmc dmc: video_4k_rate = 1560000000
rockchip-dmc dmc: video_4k_10b_rate = 1560000000
rockchip-dmc dmc: video_svep_rate = 1560000000
rockchip-dmc dmc: boost_rate = 2112000000
rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
mali fb000000.gpu: Looking up mali-supply from device tree
rockchip-dmc dmc: performance_rate = 2112000000
rockchip-dmc dmc: hdmirx_rate = 2112000000
rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
rockchip-dmc dmc: failed to get vop pn to msch rl
debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
rockchip-dmc dmc: could not find power_model node
mali fb000000.gpu: pvtm=812
mali fb000000.gpu: pvtm-volt-sel=0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 6
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 7
rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart0-win0 as cursor plane for vp0
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart1-win0 as cursor plane for vp1
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart2-win0 as cursor plane for vp2
rockchip-vop2 fdd90000.vop: [drm:vop2_create_crtc] Esmart3-win0 as cursor plane for vp3
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
mali fb000000.gpu: avs=0
W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
mali fb000000.gpu: GPU hardware issue table may need updating:
r0p0 status 5 is unknown; treating as r0p0 status 0
mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 5
mali fb000000.gpu: No priority control manager is configured
mali fb000000.gpu: No memory group manager is configured
mali fb000000.gpu: Protected memory allocator not available
mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
rockchip-drm display-subsystem: bound fdd90000.vop (ops vop2_component_ops)
mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
rockchip-drm display-subsystem: bound fde20000.dsi (ops dw_mipi_dsi2_ops)
rockchip-drm display-subsystem: bound fde50000.dp (ops dw_dp_component_ops)
mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
rockchip-drm display-subsystem: failed to parse loader memory
mali fb000000.gpu: Probed as mali0
[drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
input: adc-keys as /devices/platform/adc-keys/input/input5
husb311 6-004e: Looking up vbus-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdmmc-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdmmc-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gmac-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gmac-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Adding to iommu group 0
RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
RKNPU fdab0000.npu: Looking up mem-supply from device tree
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up mem-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: leakage=11
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
RKNPU fdab0000.npu: pvtm=839
RKNPU fdab0000.npu: pvtm-volt-sel=2
RKNPU fdab0000.npu: avs=0
RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
RKNPU fdab0000.npu: failed to find power_model node
RKNPU fdab0000.npu: RKNPU: failed to initialize power model
RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
rockchip-pm rockchip-suspend: not set pwm-regulator-config
ALSA device list:
#0: HDMI/DP-rockchip-0
#1: rockchip-es8388
#2: rockchip-dmic
usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=61.60
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
EXT4-fs (mmcblk0p5): mounting ext2 file system using the ext4 subsystem
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 179:5.
rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x30011
devtmpfs: mounted
rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40
pci_bus 0004:40: root bus resource [bus 40-4f]
pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
pci_bus 0004:40: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref]
pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0004:40:00.0: supports D1 D2
pci 0004:40:00.0: PME# supported from D0 D1 D3hot
Freeing unused kernel memory: 1600K
pci 0004:40:00.0: Primary bus is hard wired to 0
pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
pci 0004:41:00.0: [14e4:449d] type 00 class 0x028000
pci 0004:41:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
pci 0004:41:00.0: supports D1 D2
pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf47fffff]
pci 0004:40:00.0: BAR 6: assigned [mem 0xf4800000-0xf480ffff pref]
pci 0004:41:00.0: BAR 2: assigned [mem 0xf4400000-0xf47fffff 64bit]
pci 0004:41:00.0: BAR 0: assigned [mem 0xf4200000-0xf420ffff 64bit]
pci 0004:40:00.0: PCI bridge to [bus 41]
pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf47fffff]
Run /sbin/init as init process
with arguments:
/sbin/init
cros_debug
cros_secure
with environment:
HOME=/
TERM=linux
pcieport 0004:40:00.0: PME: Signaling with IRQ 119
pcieport 0004:40:00.0: AER: enabled with IRQ 120
vendor storage:20190527 ret = 0
usb 1-1: New USB device found, idVendor=1bcf, idProduct=28c4, bcdDevice= 7.04
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Hy-QSXGA(9D35)-Camera
usb 1-1: Manufacturer: STJC-220704-A
usb 1-1: SerialNumber: 01.00.00
uvcvideo: Found UVC 1.00 device Hy-QSXGA(9D35)-Camera (1bcf:28c4)
uvcvideo: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
uvcvideo: Failed to query (GET_INFO) UVC control 9 on unit 1: -32 (exp. 1).
SELinux: Permission nlmsg_getneigh in class netlink_route_socket not defined in policy.
SELinux: Permission perfmon in class capability2 not defined in policy.
SELinux: Permission bpf in class capability2 not defined in policy.
SELinux: Permission checkpoint_restore in class capability2 not defined in policy.
SELinux: Permission perfmon in class cap2_userns not defined in policy.
SELinux: Permission bpf in class cap2_userns not defined in policy.
SELinux: Permission checkpoint_restore in class cap2_userns not defined in policy.
SELinux: Class anon_inode not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=0
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=0
SELinux: policy capability ioctl_skip_cloexec=0
audit: type=1403 audit(1667582891.953:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
usb 2-1.1: new full-speed USB device number 3 using ehci-platform
usb 2-1.1: New USB device found, idVendor=258a, idProduct=0602, bcdDevice= 0.04
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: USB HID Keyboard
usb 2-1.1: Manufacturer: DOKING
usb 2-1.1: SerialNumber: DK 7280 001
input: DOKING USB HID Keyboard as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:258A:0602.0001/input/input6
audit: type=1400 audit(1667582892.130:3): avc: granted { execute } for pid=240 comm="sh" name="crash_reporter" dev="mmcblk0p5" ino=9680 scontext=u:r:cros_init_scripts:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
hid-generic 0003:258A:0602.0001: input,hidraw0: USB HID v1.11 Keyboard [DOKING USB HID Keyboard] on usb-fc880000.usb-1.1/input0
input: DOKING USB HID Keyboard Mouse as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:258A:0602.0002/input/input7
input: DOKING USB HID Keyboard Consumer Control as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:258A:0602.0002/input/input8
input: DOKING USB HID Keyboard System Control as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:258A:0602.0002/input/input9
input: DOKING USB HID Keyboard Touchpad as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:258A:0602.0002/input/input10
input: DOKING USB HID Keyboard Wireless Radio Control as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:258A:0602.0002/input/input12
input: DOKING USB HID Keyboard UNKNOWN as /devices/platform/fc880000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:258A:0602.0002/input/input13
hid-multitouch 0003:258A:0602.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [DOKING USB HID Keyboard] on usb-fc880000.usb-1.1/input1
LoadPin: mmcblk0p5 (179:5): writable
LoadPin: enforcement can be disabled.
LoadPin: kernel-module pinned obj="/lib/modules/5.10.110/kernel/lib/lz4/lz4_decompress.ko" pid=254 cmdline="/sbin/modprobe -q -- fs-squashfs"
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registered swp emulation handler
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 425
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 304
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 307
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 300
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 305
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 309
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 308
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 312
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 302
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 311
SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 1000
udevd[275]: starting version 225
[HXTP] Himax common touch panel driver init
[HXTP] himax_chip_common_probe:Enter
[HXTP] PDATA START
[HXTP] ic_data START
[HXTP] DT-himax_parse_dt:panel-coords = 0, 1599, 0, 2559
[HXTP] DT-himax_parse_dt:display-coords = (1600, 2560)
[HXTP] DT:gpio_3v3_en value is not valid
[HXTP] DT:gpio_irq=45, gpio_rst=44, gpio_3v3_en=-2
[HXTP] DT:protocol_type=1
[HXTP] DT-No vk info in DT
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,discard
[HXTP] hx_ic_register:Entering!
[HXTP] _hx83121_init
[HXTP] hx83121_pin_reset: Now reset the Touch chip.
EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[HXTP][ERROR] himax_bus_read: i2c_read_block retry over 3
[HXTP][ERROR] hx83121_chip_detect: bus access fail!
EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
EXT4-fs (loop1): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
tpm tpm0: A TPM error (256) occurred attempting the self test
tpm tpm0: starting up the TPM manually
frecon[452]: Frecon using drm driver rockchip, version 3.0, date(20140818), desc(RockChip Soc DRM)
[HXTP] hx83121_pin_reset: Now reset the Touch chip.
[HXTP][ERROR] himax_bus_read: i2c_read_block retry over 3
[HXTP][ERROR] hx83121_chip_detect: bus access fail!
bq25700-charger 6-006b: INPUT_CURRENT:60, INPUT_VOLTAGE:0, CHARGE_CURRENT:46
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1600x2560p60, type: 16(if:20) for vp2 dclk: 275000000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Enable DSC0 slice:1600x40, slice num:1
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out2 div: 2 dclk_core2 div: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop2 to 275000000, get 275000000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_enable_dsc] DSC0: txp:275000000 div:0, pxl:275000000 div:0, dsc:68750000 div:2
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard,commit=600
[HXTP] hx83121_pin_reset: Now reset the Touch chip.
[HXTP] hx83121_sense_off: cnt = 0, data[0] = 0xA5!
encrypted-reboo (pid 502) is setting deprecated v1 encryption policy; recommend upgrading to v2.
[HXTP] hx83121_sense_off: cnt = 1, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 2, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 3, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 4, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 5, data[0] = 0xA5!
bq25700-charger 6-006b: INPUT_CURRENT:60, INPUT_VOLTAGE:0, CHARGE_CURRENT:46
[HXTP] hx83121_sense_off: cnt = 6, data[0] = 0xA5!
===>hgc: dsc_mode: 0x2
bq25700-charger 6-006b: INPUT_CURRENT:10, INPUT_VOLTAGE:0, CHARGE_CURRENT:7
audit: type=1400 audit(1667582893.276:4): avc: granted { execute } for pid=512 comm="chromeos_startu" name="crash_reporter" dev="mmcblk0p5" ino=9680 scontext=u:r:chromeos_startup:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
[HXTP] hx83121_sense_off: cnt = 7, data[0] = 0xA5!
Chromium OS LSM: Blocked symlink traversal for path fe:0:/var/lib/timezone/localtime (see for context and rationale)
[HXTP] hx83121_sense_off: cnt = 8, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 9, data[0] = 0xA5!
bq25700-charger 6-006b: INPUT_CURRENT:45, INPUT_VOLTAGE:192, CHARGE_CURRENT:35
[HXTP] hx83121_sense_off: cnt = 10, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 11, data[0] = 0xA5!
===>hgc: dsc_mode: 0x1
[HXTP] hx83121_sense_off: cnt = 12, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 13, data[0] = 0xA5!
[HXTP] hx83121_sense_off: cnt = 14, data[0] = 0x87!
[HXTP] hx83121_sense_off: Check enter_save_mode data[0]=C
[HXTP] hx83121_chip_detect:Read driver IC ID = 83,12,1A
[HXTP] hx83121_chip_detect:detect IC HX83121A successfully
[HXTP] himax_mcu_in_cmd_struct_init: Entering!
[HXTP] himax_mcu_in_cmd_init: Entering!
[HXTP] himax_hx83121a_reg_re_init:Entering!
[HXTP] himax_hx83121a_func_re_init:Entering!
[HXTP] hx_ic_register: detect IC!
[HXTP] hx_ic_register:END!
[HXTP] hx83121a_chip_init:IC cell type = 1
[HXTP] himax_mcu_touch_information:HX_RX_NUM =60,HX_TX_NUM =40
[HXTP] himax_mcu_touch_information:HX_MAX_PT=10
[HXTP] himax_mcu_touch_information:HX_Y_RES=2560,HX_X_RES =1600
[HXTP] himax_mcu_touch_information:HX_INT_IS_EDGE =0,HX_STYLUS_FUNC = 1
[HXTP] himax_mcu_touch_information:HX_STYLUS_ID_V2 =1,HX_STYLUS_RATIO = 10
[HXTP] himax_int_register_trigger level trigger low
[HXTP] himax_ts_register_interrupt: irq enabled at gpio: 121
[HXTP] himax_int_enable: Entering!
[HXTP] enable = 0
[HXTP] himax_report_data_init:rawdata_fsz = 47,HX_MAX_PT:10,hx_raw_cnt_max:2
[HXTP] himax_report_data_init:hx_raw_cnt_rmd:2,g_hx_rawdata_size:54,touch_info_size:68
[HXTP] himax_chip_common_init: Use Protocol Type B
[HXTP] himax_inspection_init: enter, 2868
[HXTP] himax_debug_init:Enter
[HXTP] input_set_abs_params: mix_x 0, max_x 1599, min_y 0, max_y 2559
input: himax-touchscreen as /devices/platform/feac0000.i2c/i2c-4/4-0048/input/input14
input: himax-stylus as /devices/platform/feac0000.i2c/i2c-4/4-0048/input/input15
[HXTP] himax_input_register, input device registered.
[HXTP] hx_chk_flash_sts: Entering, 261120
[HXTP] himax_mcu_calculateChecksum:Now size=261120
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
[HXTP] Waiting for HW ready!
dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_encoder_enable] final DSI-Link bandwidth: 676000 x 4 Kbps
[HXTP] himax_mcu_check_CRC:data[3]=0,data[2]=0,data[1]=0,data[0]=0
frecon[452]: Frecon using drm driver rockchip, version 3.0, date(20140818), desc(RockChip Soc DRM)
[HXTP] himax_mcu_flash_lastdata_check: Now size is 261120, the start_addr is 0x0003FB80
[HXTP] FLASH[0003FBFC] ~ FLASH[0003FBFF] = 5C6AD765
[HXTP] himax_mcu_reload_disable:entering
[HXTP] himax_mcu_reload_disable: setting OK!
[HXTP] himax_mcu_assign_sorting_mode:addr: 0x10007F04, write to:0x00000000
[HXTP] Enter hx83121a_sense_on
[HXTP] himax_mcu_interface_on:Polling burst mode: 10 times
[HXTP] himax_mcu_ic_reset,status: loadconfig=0,int_off=0
[HXTP] himax_mcu_pin_reset: Now reset the Touch chip.
[HXTP] himax_mcu_power_on_init: waiting for FW reload data
[HXTP] himax_mcu_power_on_init: wait FW reload 1 times
[HXTP] reg[0-3] : 0x10007F40 = 0x12, 0xE8, 0xFB, 0xD3
[HXTP] reg[0-3] : 0x900000A8 = 0x05, 0x00, 0x00, 0x00
[HXTP] reg[0-3] : 0x900000E8 = 0x04, 0x39, 0x02, 0x08
[HXTP] reg[0-3] : 0x900000E4 = 0x02, 0x00, 0x00, 0x00
[HXTP] himax_mcu_power_on_init: FW reload done
[HXTP] PANEL_VER : B
[HXTP] FW_VER : C204
[HXTP] TOUCH_VER : A3
[HXTP] DISPLAY_VER : 0
[HXTP] CID_VER : B00
[HXTP] Cusomer ID = CSOT
[HXTP] Project ID = JWIPC
[HXTP] FIX_TOUCH_INFO is OK
[HXTP] i_get_FW: request file Himax_firmware.bin finished
[HXTP] hx_bin_desc_data_get: CONFIG_TABLE in 20400
[HXTP] hx_bin_desc_data_get: CID_VER in 21402
[HXTP] hx_bin_desc_data_get: FW_VER in 21405
[HXTP] hx_bin_desc_data_get: CFG_VER in = 00021500
[HXTP] hx_bin_desc_data_get: End in 130
[HXTP] himax_auto_update_check: Entering!
[HXTP] himax_get_fw_ver_bin: use default incell address.
[HXTP] Catch fw version in bin file!
[HXTP] himax_auto_update_check: Need not update!
[HXTP] himax_int_enable: Entering!
[HXTP] enable = 1
EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
init: ureadahead main process (672) terminated with status 5
low_mem: threshold[0] 399 MB
low_mem: threshold[1] 3070 MB
zram: Added device: zram0
zram0: detected capacity change from 0 to 11790512128
overlayfs: "xino" feature enabled using 32 upper inode bits.
Adding 11514168k swap on /dev/zram0. Priority:-2 extents:1 across:11514168k SS
init: daisydog pre-start process (923) terminated with status 1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mali fb000000.gpu: Loading Mali firmware 0x1010000
mali fb000000.gpu: Mali firmware git_sha: 272c9bcef53a14e456435ff2e57fb8a4b855cdbd
EXT4-fs (mmcblk0p8): re-mounted. Opts:
init: failsafe-delay main process (920) killed by TERM signal
fuse: init (API version 7.32)
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-ce"
fscrypt: AES-256-XTS using implementation "xts-aes-ce"
st-accel-i2c 3-0019: Looking up vdd-supply from device tree
st-accel-i2c 3-0019: Looking up vdd-supply property in node /i2c@feab0000/lis2dw@19 failed
st-accel-i2c 3-0019: supply vdd not found, using dummy regulator
st-accel-i2c 3-0019: Looking up vddio-supply from device tree
st-accel-i2c 3-0019: Looking up vddio-supply property in node /i2c@feab0000/lis2dw@19 failed
st-accel-i2c 3-0019: supply vddio not found, using dummy regulator
iio iio:device1: interrupts on the falling edge or active low level
iio iio:device1: registered accelerometer lis2dw12
[dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.18 (wlan=r892223-20220519-1)
[dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 8131584(7941K)
[dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.20 (wlan=r892223-20220701-3)
[dhd] ANDROID_VERSION = 12
[dhd] ======== dhd_wlan_init_plat_data ========
[WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=127, oob_irq_flags=0x4
[dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[dhd] dhd_wifi_platform_load: Enter
[dhd] dhdpcie_pci_probe : no mutex held
[dhd] dhdpcie_pci_probe : set mutex lock
[dhd] PCI_PROBE: bus 41, slot 0,vendor 14E4, device 449D(good PCI location)
[dhd] dhdpcie_init: found adapter info 'DHD generic adapter'
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 3, size 139264
[dhd] succeed to alloc static buf
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 4, size 0
pcieh 0004:41:00.0: enabling device (0000 -> 0002)
[dhd] Disable CTO
[dhd] ******** Perform FLR ********
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0xb080
[dhd] read_config: reg=0x88 read val=0x8080
[dhd] ******** FLR Succedeed ********
[dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x0
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 7, size 35072
[dhd] dhd_conf_set_chiprev : devid=0x449d, chip=0xaae8, chiprev=2, svid=0x14e4, ssid=0xaae8
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 0, size 1776
[dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 1025
[dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 4097
[dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 36865
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 5, size 65536
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 19, size 65712
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 20, size 262144
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 22, size 65536
[dhd] dhd_attach(): thread:dhd_watchdog_thread:7e6 started
[dhd] dhd_deferred_work_init: work queue initialized
[dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 3
[dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=10, TCPDATA_INFO_MAXNUM=10
[dhd] dhd_cpumasks_init CPU masks primary(big)=0xf0 secondary(little)=0xe
[dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[dhd] dhdpcie_bus_attach: making DHD_BUS_DOWN
[dhd] dhdpcie_init: rc_dev from dev->bus->self (1d87:3588) is ffffff81002a6000
[dhd] dhdpcie_init: rc_ep_aspm_cap: 1 rc_ep_l1ss_cap: 1
[dhd] dhdpcie_request_irq: INTx enabled
[dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x400000
[dhd] dhd_bus_download_firmware: firmware path=/lib/firmware/fw_bcmdhd.bin, nvram path=/lib/firmware/nvram.txt
[dhd] dhdpcie_dump_resource: BAR0(VA): 0xffffffc0187e8000, BAR0(PA): 0x00000000f4200000, SIZE: 32768
[dhd] dhdpcie_dump_resource: BAR1(VA): 0xffffffc019000000, BAR1(PA): 0x00000000f4400000, SIZE: 4194304
[dhd] dhd_conf_set_path_params : Final fw_path=/lib/firmware/fw_bcm43752a2_pcie_ag.bin
[dhd] dhd_conf_set_path_params : Final nv_path=/lib/firmware/nvram_AP6275P.txt
[dhd] dhd_conf_set_path_params : Final clm_path=/lib/firmware/clm_bcm43752a2_pcie_ag.blob
[dhd] dhd_conf_set_path_params : Final conf_path=/lib/firmware/config.txt
[dhd] dhd_get_download_buffer: Open image file failed /lib/firmware/config.txt
[dhd] dhd_conf_read_config : Ignore config file /lib/firmware/config.txt
[dhd] d2h_intr_method -> PCIE_INTX(0); d2h_intr_control -> D2H_INTMASK(0)
[dhd] dhdpcie_download_code_file: dhd_tcm_test_enable 0
[dhd] dhdpcie_download_code_file: download firmware /lib/firmware/fw_bcm43752a2_pcie_ag.bin
[dhd] dhd_os_open_image1: /lib/firmware/fw_bcm43752a2_pcie_ag.bin (857142 bytes) open success
NET: Registered protocol family 40
jw_io_control_probe ok
IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[dhd] dhd_os_open_image1: /lib/firmware/nvram_AP6275P.txt (7335 bytes) open success
[dhd] dhdpcie_download_nvram: dhd_get_download_buffer len 7335
[dhd] # AP6275P_NVRAM_V1.1_20200702
[dhd] dhdpcie_download_nvram: process_nvram_vars len 5860
[dhd] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
[dhd] dhd_bus_aer_config: Configure AER registers for EP
[dhd] dhd_bus_aer_config: Configure AER registers for RC
[dhd] ### Total time ARM OOR to Readshared pass took 81033 usec ###
[dhd] dhdpcie_readshared: PCIe shared addr (0x001f8974) read took 80000 usec before dongle is ready
[dhd] H2D DMA WR INDX : array size 172 = 4 * 43
[dhd] D2H DMA RD INDX : array size 16 = 4 * 4
[dhd] D2H DMA WR INDX : array size 16 = 4 * 4
[dhd] H2D DMA RD INDX : array size 172 = 4 * 43
[dhd] dhdpcie_readshared: max H2D queues 40
[dhd] FW supports debug buf dest ? N
[dhd] dhd_bus_init: Enabling bus->intr_enabled
[dhd] dhdpcie_oob_intr_register OOB irq=127 flags=0x4
[dhd] dhdpcie_oob_intr_register: enable_irq_wake
[dhd] dhd_bus_start: Initializing 43 h2drings
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 9, size 32896
[dhd] dhd_prot_init:3925: h2d_max_txpost = 512
[dhd] dhd_prot_init:3940: MAX_RXBUFPOST = 511
[dhd] ENABLING DW:0
[dhd] IDMA not enabled in FW !!
[dhd] IFRM not enabled in FW !!
[dhd] DAR not enabled in FW !!
[dhd] Enable hostcap: EXTD TXS in txcpl
[dhd] dhd_prot_d2h_sync_init(): D2H sync mechanism is NONE
[dhd] dhd_bus_hostready : Read PCICMD Reg: 0x00100006
[dhd] dhd_bus_dump_dar_registers: dar_clk_ctrl(0xa08:0x10b0040) dar_pwr_ctrl(0xa0c:0x30000) dar_intstat(0xa10:0x0)
[dhd] dhd_bus_dump_dar_registers: dar_errlog(0xa60:0x0) dar_erraddr(0xa64:0x0) dar_pcie_mbint(0xa68:0x0)
[dhd] dhd_bus_hostready: Ring Hostready:1
[dhd] Attach flowrings pool for 40 rings
[dhd] dhd_send_d2h_ringcreate ringid: 3 idx: 46 max_h2d: 43
[dhd] dhd_prot_process_d2h_ring_create_complete ring create Response status = 0 ring 3, id 0xfffc
[dhd] info buffer post after ring create
[dhd] wlc_ver_major 12, wlc_ver_minor 1
[dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[dhd] dhd_sync_with_dongle: GET_REVINFO device 0x449d, vendor 0x14e4, chipnum 0xaae8
[dhd] dhd_sync_with_dongle: RxBuf Post : 2048
[dhd] dhd_preinit_ioctls: preinit_status IOVAR not supported, use legacy preinit
[dhd] dhd_tcpack_suppress_set 377: already set to 3
[dhd] dhd_legacy_preinit_ioctls: hostwake_oob enabled
[dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address 70:4a:0e:d6:dc:20
[dhd] dhd_os_open_image1: /lib/firmware/clm_bcm43752a2_pcie_ag.blob (29225 bytes) open success
[dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
[dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
[dhd] Firmware up: op_mode=0x0005, MAC=70:4a:0e:d6:dc:20
[dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0
[dhd] arp_enable:1 arp_ol:0
[dhd] Driver: 101.10.361.20 (wlan=r892223-20220701-3)
[dhd] Firmware: wl0: Aug 3 2021 17:38:16 version 18.35.387.23.57 (gdc961cae) FWID 01-ea656a70
[dhd] CLM: 9.9.8_SS (2021-05-10 15:05:58)
[dhd] dhd_pno_init: Support Android Location Service
[dhd] dhd_rtt_init ENTRY
[dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[dhd] dhd_rtt_init : FTM is not supported
[dhd] dhd_rtt_init EXIT, err = 0
[dhd] [INIT] logset:8 is preserve/chatty
[dhd] [INIT] logset:10 is preserve/chatty
[dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
[dhd] dhd_conf_set_country : set country CN, revision 0
[dhd] dhd_rx_frame: net device is NOT registered. drop event packet
[dhd] dhd_rx_frame: net device is NOT registered. drop event packet
[dhd] dhd_conf_set_country : Country code: CN (CN/0)
[dhd] Dongle Host Driver, version 101.10.361.20 (wlan=r892223-20220701-3)
[dhd] Register interface [wlan0] MAC: 70:4a:0e:d6:dc:20
[dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 3 -> mode 0
[dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=10, TCPDATA_INFO_MAXNUM=10
[dhd] [wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1
[dhd] dhd_rtt_deinit: ENTER
[dhd] dhd_rtt_deinit: EXIT, err = 0
[dhd] dhd_bus_devreset: == Power OFF ==
[dhd] dhd_bus_stop: making DHD_BUS_DOWN
[dhd] dhd_dpc_kill: tasklet disabled
[dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[dhd] dhd_bus_devreset: WLAN OFF Done
[dhd] wifi_platform_set_power = 0, delay: 0 msec
[dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[WLAN_RFKILL]: rockchip_wifi_power: 0
[WLAN_RFKILL]: rockchip_wifi_power: toggle = false
wifi power off
[dhd] dhd_pri_open : probe is already running! return.
[dhd] dhd_pri_open : probe is already running! return.
[WLAN_RFKILL]: wifi shut off power [GPIO23-0]
[dhd] [wlan0] wl_android_wifi_off : out
[dhd] dhdpcie_pci_probe : mutex is released.
[dhd] _dhd_module_init: Exit err=0
EXT4-fs (mmcblk0p8): re-mounted. Opts:
IPv6: ADDRCONF(NETDEV_CHANGE): arc_ns0: link becomes ready
[dhd] dhd_pri_open : no mutex held
[dhd] dhd_pri_open : set mutex lock
[dhd] [wlan0] dhd_open : Enter
[dhd] Dongle Host Driver, version 101.10.361.20 (wlan=r892223-20220701-3)
[dhd] dhd_open: ######### called for ifidx=0 #########
[dhd] [wlan0] wl_android_wifi_on : in g_wifi_on=0
[dhd] wifi_platform_set_power = 1, delay: 200 msec
[dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[WLAN_RFKILL]: wifi turn on power [GPIO23-1]
[dhd] dhd_bus_devreset: == Power ON ==
[dhd] dhd_bus_devreset: dhdpcie_bus_start_host_dev OK
[dhd] dhd_bus_aspm_enable_dev: EP already disabled linkctrl: 0x10110000
[dhd] dhd_bus_aspm_enable_dev: RC already disabled linkctrl: 0x30110000
[dhd] Disable CTO
[dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
[dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x400000
[dhd] dhdpcie_request_irq: INTx enabled
[dhd] dhd_bus_download_firmware: firmware path=/lib/firmware/fw_bcmdhd.bin, nvram path=/lib/firmware/nvram.txt
[dhd] dhdpcie_dump_resource: BAR0(VA): 0xffffffc0190a8000, BAR0(PA): 0x00000000f4200000, SIZE: 32768
[dhd] dhdpcie_dump_resource: BAR1(VA): 0xffffffc019800000, BAR1(PA): 0x00000000f4400000, SIZE: 4194304
[dhd] dhd_conf_set_path_params : Final fw_path=/lib/firmware/fw_bcm43752a2_pcie_ag.bin
[dhd] dhd_conf_set_path_params : Final nv_path=/lib/firmware/nvram_AP6275P.txt
[dhd] dhd_conf_set_path_params : Final clm_path=/lib/firmware/clm_bcm43752a2_pcie_ag.blob
[dhd] dhd_conf_set_path_params : Final conf_path=/lib/firmware/config.txt
[dhd] dhd_get_download_buffer: Open image file failed /lib/firmware/config.txt
[dhd] dhd_conf_read_config : Ignore config file /lib/firmware/config.txt
[dhd] d2h_intr_method -> PCIE_INTX(0); d2h_intr_control -> D2H_INTMASK(0)
[dhd] dhdpcie_download_code_file: dhd_tcm_test_enable 0
[dhd] dhdpcie_download_code_file: download firmware /lib/firmware/fw_bcm43752a2_pcie_ag.bin
[dhd] dhd_os_open_image1: /lib/firmware/fw_bcm43752a2_pcie_ag.bin (857142 bytes) open success
[dhd] dhd_os_open_image1: /lib/firmware/nvram_AP6275P.txt (7335 bytes) open success
[dhd] dhdpcie_download_nvram: dhd_get_download_buffer len 7335
[dhd] # AP6275P_NVRAM_V1.1_20200702
[dhd] dhdpcie_download_nvram: process_nvram_vars len 5860
[dhd] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
[dhd] dhd_bus_aer_config: Configure AER registers for EP
[dhd] dhd_bus_aer_config: Configure AER registers for RC
[dhd] ### Total time ARM OOR to Readshared pass took 79275 usec ###
[dhd] dhdpcie_readshared: PCIe shared addr (0x001f8974) read took 80000 usec before dongle is ready
[dhd] H2D DMA WR INDX : array size 172 = 4 * 43
[dhd] D2H DMA RD INDX : array size 16 = 4 * 4
[dhd] D2H DMA WR INDX : array size 16 = 4 * 4
[dhd] H2D DMA RD INDX : array size 172 = 4 * 43
[dhd] dhdpcie_readshared: max H2D queues 40
[dhd] FW supports debug buf dest ? N
[dhd] dhd_bus_init: Enabling bus->intr_enabled
[dhd] dhdpcie_oob_intr_register OOB irq=127 flags=0x4
[dhd] dhdpcie_oob_intr_register: enable_irq_wake
[dhd] dhd_bus_start: Initializing 43 h2drings
[dhd] STATIC-MSG) dhd_wlan_mem_prealloc : sectoin 9, size 32896
[dhd] dhd_prot_init:3925: h2d_max_txpost = 512
[dhd] dhd_prot_init:3940: MAX_RXBUFPOST = 511
[dhd] ENABLING DW:0
[dhd] IDMA not enabled in FW !!
[dhd] IFRM not enabled in FW !!
[dhd] DAR not enabled in FW !!
[dhd] Enable hostcap: EXTD TXS in txcpl
[dhd] dhd_prot_d2h_sync_init(): D2H sync mechanism is NONE
[dhd] dhd_bus_hostready : Read PCICMD Reg: 0x00100006
[dhd] dhd_bus_dump_dar_registers: dar_clk_ctrl(0xa08:0x10b0040) dar_pwr_ctrl(0xa0c:0x30000) dar_intstat(0xa10:0x0)
[dhd] dhd_bus_dump_dar_registers: dar_errlog(0xa60:0x0) dar_erraddr(0xa64:0x0) dar_pcie_mbint(0xa68:0x0)
[dhd] dhd_bus_hostready: Ring Hostready:1
[dhd] dhd_send_d2h_ringcreate ringid: 3 idx: 46 max_h2d: 43
[dhd] dhd_prot_process_d2h_ring_create_complete ring create Response status = 0 ring 3, id 0xfffc
[dhd] info buffer post after ring create
[dhd] wlc_ver_major 12, wlc_ver_minor 1
[dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[dhd] dhd_sync_with_dongle: GET_REVINFO device 0x449d, vendor 0x14e4, chipnum 0xaae8
[dhd] dhd_sync_with_dongle: RxBuf Post : 2048
[dhd] dhd_preinit_ioctls: preinit_status IOVAR not supported, use legacy preinit
[dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 3
[dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=10, TCPDATA_INFO_MAXNUM=10
[dhd] dhd_legacy_preinit_ioctls: hostwake_oob enabled
[dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address 70:4a:0e:d6:dc:20
[dhd] dhd_os_open_image1: /lib/firmware/clm_bcm43752a2_pcie_ag.blob (29225 bytes) open success
[dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
[dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
[dhd] Firmware up: op_mode=0x0005, MAC=70:4a:0e:d6:dc:20
[dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0
[dhd] arp_enable:1 arp_ol:0
[dhd] Driver: 101.10.361.20 (wlan=r892223-20220701-3)
[dhd] Firmware: wl0: Aug 3 2021 17:38:16 version 18.35.387.23.57 (gdc961cae) FWID 01-ea656a70
[dhd] CLM: 9.9.8_SS (2021-05-10 15:05:58)
[dhd] dhd_pno_init: Support Android Location Service
[dhd] dhd_rtt_init ENTRY
[dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[dhd] dhd_rtt_init : FTM is not supported
[dhd] dhd_rtt_init EXIT, err = 0
[dhd] [INIT] logset:8 is preserve/chatty
[dhd] [INIT] logset:10 is preserve/chatty
[dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
[dhd] dhd_conf_set_country : set country CN, revision 0
[dhd] dhd_rx_frame: net device is NOT registered. drop event packet
[dhd] dhd_conf_set_country : Country code: CN (CN/0)
[dhd] dhd_bus_devreset: WLAN Power On Done
[dhd] [wlan0] wl_android_wifi_on : Success
[dhd] dhd_rx_frame: net device is NOT registered. drop event packet
[dhd] dhd_bus_aspm_enable_dev: RC ENABLE , linkctrl_before: 0x30110000 linkctrl_after: 0x30110002
[dhd] dhd_bus_aspm_enable_dev: EP already enabled linkctrl: 0x10110142
[dhd] [wlan0] dhd_open : Exit ret=0
[dhd] [wlan0] dhd_pri_open : tx queue started
[dhd] [wlan0] custom_xps_map_set : Done. mapping cpu
[dhd] dhd_pri_open : mutex is released.
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[HXTP] S1@0, 2461
[HXTP] E1@0, 2461
of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty
input: Lid Switch as /devices/platform/hall-mh248/input/input16
mh248-fyde hall-mh248: hall_mh248-fyde_probe success.
-fun-[0863]-[@mas_init] is called!
-dbg-[0159]-[@mas_get_platform]start!
-dbg-[0170]-[@mas_get_platform]start register spi
lipeiyang [mas_probe][775]
-dbg-[0776]-[@mas_probe]start
-dbg-[0784]-[@mas_probe]start3333
-dbg-[0679]-[@init_connect]start
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 71,32 bit host data width,256 deep fifo
dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2c0000 failed
dwmmc_rockchip fe2c0000.mmc: Got CD GPIO
file system registered
guq srxb[3] = 65 srxb[2] = 65
lipeiyang [mas_probe][795]ret[1]
-dbg-[0808]-[@mas_probe]start11111
-dbg-[0816]-[@mas_probe]start22222
input: madev as /devices/virtual/input/input17
-fun-[0823]-[@mas_probe] is called!
-dbg-[0831]-[@mas_probe]end1111
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
init: init_leds main process (2571) terminated with status 2
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
process '/usr/sbin/adbd' started with executable stack
read descriptors
read strings
mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
mmc1: new high speed SDXC card at address 59b4
mmcblk1: mmc1:59b4 LX256 233 GiB
mmcblk1: p1
uvcvideo: Failed to query (GET_DEF) UVC control 9 on unit 1: -32 (exp. 2).
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol ATH3K registered
udevd[3294]: Process '/bin/chown power:power /sys//devices/platform/febc0000.serial/tty/ttyS9/hci0/identity' failed with exit code 1.
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: hci0: unsupported parameter 28
Bluetooth: hci0: unsupported parameter 31
Bluetooth: hci0: unsupported parameter 28
Bluetooth: hci0: unsupported parameter 31
cgroup: Unknown subsys name 'memory'
cgroup: Unknown subsys name 'schedtune'
new mount options do not match the existing superblock, will be ignored
EXT4-fs (mmcblk0p1): re-mounted. Opts:
EXT4-fs (mmcblk0p1): re-mounted. Opts:
cgroup: Unknown subsys name 'schedtune'
cgroup: Unknown subsys name 'schedtune'
capability: warning: `main' uses 32-bit capabilities (legacy support in use)
tun: Universal TUN/TAP device driver, 1.6
IPv6: ADDRCONF(NETDEV_CHANGE): vetharc0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): arc0: link becomes ready
arcbr0: port 1(vetharc0) entered blocking state
arcbr0: port 1(vetharc0) entered disabled state
device vetharc0 entered promiscuous mode
arcbr0: port 1(vetharc0) entered blocking state
arcbr0: port 1(vetharc0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
arc_wlan0: port 1(vethwlan0) entered blocking state
arc_wlan0: port 1(vethwlan0) entered disabled state
device vethwlan0 entered promiscuous mode
arc_wlan0: port 1(vethwlan0) entered blocking state
arc_wlan0: port 1(vethwlan0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): veth2: link becomes ready
x_tables: ip_tables: owner match: used from hooks INPUT, but only valid from OUTPUT/POSTROUTING
x_tables: ip6_tables: owner match: used from hooks INPUT, but only valid from OUTPUT/POSTROUTING
[dhd] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
EXT4-fs (dm-0): re-mounted. Opts: discard,commit=600
EXT4-fs (mmcblk0p5): re-mounted. Opts:
EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
[dhd] [wlan0] wl_ext_set_chanspec : channel 2g-11(0x100b)
[dhd] [wlan0] wl_conn_debug_info : Connecting with 8c:53:c3:dc:4b:10 ssid "gyj", len (3), channel=2g-11(chan_cnt=1), sec=wpa2/psk/mfpn/aes, rssi=-51
[dhd] [wlan0] wl_iw_event : Link UP with 8c:53:c3:dc:4b:10
[dhd] [wlan0] wl_ext_iapsta_event : [S] Link UP with 8c:53:c3:dc:4b:10
[dhd] [wlan0] wl_bss_connect_done : Report connect result - connection succeeded
[dhd] dhd_prot_flow_ring_create: Send Flow Create Req flow ID 41 for peer 8c:53:c3:dc:4b:10 prio 3 ifindex 0 items 512
[dhd] dhd_prot_flow_ring_create_response_process: Flow Create Response status = 0 Flow 41
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
[dhd] [wlan0] wl_add_keyext : key index (0)
8021q: 802.1Q VLAN Support v1.8
[dhd] dhd_prot_flow_ring_create: Send Flow Create Req flow ID 40 for peer ff:ff:ff:ff:ff:ff prio 0 ifindex 0 items 512
[dhd] dhd_prot_flow_ring_create_response_process: Flow Create Response status = 0 Flow 40
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
[dhd] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
[dhd] [wlan0] wl_cfg80211_disconnect : Reason 3, act 1, bssid 8c:53:c3:dc:4b:10
[dhd] CFG80211-ERROR) wl_escan_handler : escan is not ready. drv_scan_status 0x0 e_type 69 e_status 4
[dhd] CFG80211-ERROR) wl_escan_handler : [Repeats 0 times]
[dhd] dhd_flow_rings_delete: ifindex 0
[dhd] dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 40 for peer ff:ff:ff:ff:ff:ff prio 0 ifindex 0
[dhd] dhd_prot_flow_ring_delete: Send Flow Delete Req RING ID 41 for peer 8c:53:c3:dc:4b:10 prio 3 ifindex 0
[dhd] dhd_flow_rings_delete: ifindex 0
[dhd] wl_process_host_event: Deleting all STA from assoc list and flowrings.
[dhd] dhd_flow_rings_delete: ifindex 0
[dhd] dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 Flow 40
[dhd] [wlan0] wl_handle_link_down : Link down: WLC_E_LINK(16), reason 2 from 8c:53:c3:dc:4b:10
[dhd] [wlan0] wl_iw_event : [0 times] disconnected with 8c:53:c3:dc:4b:10, event 11, reason 8
[dhd] [wlan0] wl_handle_link_down : Disconnect event sent to upper layerevent:16 e->reason=33554432 reason=2 ie_len=0 from 8c:53:c3:dc:4b:10
[dhd] dhd_prot_flow_ring_delete_response_process: Flow Delete Response status = 0 Flow 41
[dhd] [wlan0] wl_ext_iapsta_event : [S] Link down with 8c:53:c3:dc:4b:10, WLC_E_DISASSOC(11), reason 8
[dhd] [wlan0] wl_ext_iapsta_event : [S] Link down with 8c:53:c3:dc:4b:10, WLC_E_DISASSOC(11), reason 8
[dhd] [wlan0] wl_iw_event : Link Down with 8c:53:c3:dc:4b:10, reason=2
[dhd] [wlan0] wl_ext_iapsta_event : [S] Link down with 8c:53:c3:dc:4b:10, WLC_E_LINK(16), reason 2
[dhd] [wlan0] wl_ext_set_chanspec : channel 5g-48(0xe32a)
[dhd] [wlan0] wl_conn_debug_info : Connecting with 8c:53:c3:dc:4b:11 ssid "PegionFIsh_5G", len (13), channel=5g-48(chan_cnt=1), sec=wpa2/psk/mfpn/aes, rssi=0
[dhd] [wlan0] wl_iw_event : Link UP with 8c:53:c3:dc:4b:11
[dhd] [wlan0] wl_ext_iapsta_event : [S] Link UP with 8c:53:c3:dc:4b:11
[dhd] [wlan0] wl_bss_connect_done : Report connect result - connection succeeded
[dhd] dhd_prot_flow_ring_create: Send Flow Create Req flow ID 41 for peer 8c:53:c3:dc:4b:11 prio 3 ifindex 0 items 512
[dhd] dhd_prot_flow_ring_create_response_process: Flow Create Response status = 0 Flow 41
[dhd] [wlan0] wl_add_keyext : key index (0)
[dhd] dhd_prot_flow_ring_create: Send Flow Create Req flow ID 40 for peer ff:ff:ff:ff:ff:ff prio 0 ifindex 0 items 512
[dhd] dhd_prot_flow_ring_create_response_process: Flow Create Response status = 0 Flow 40
nldo5_s0: disabling
combophy_avdd0v85: disabling
perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3142 > 3141), lowering kernel.perf_event_max_sample_rate to 63600
perf: interrupt took too long (3930 > 3927), lowering kernel.perf_event_max_sample_rate to 50700
perf: interrupt took too long (4916 > 4912), lowering kernel.perf_event_max_sample_rate to 40500
perf: interrupt took too long (6148 > 6145), lowering kernel.perf_event_max_sample_rate to 32400
perf: interrupt took too long (7701 > 7685), lowering kernel.perf_event_max_sample_rate to 25800